Call Us: +86-15827930633 +86-728-2655088

Email: info@hubeiyazhi.com

0086-728-2655088

Language

News

Home page

What Is The Difference Between Level 1 And Level 2 Isolation Gowns

May 25,2016

What's A Level 1 Isolation Gown?

A level 1 isolation gown is the lowest level of protection, considered “minimal risk”. A level 1 isolation gown is designed to be used for basic care, such as by those working in hospice, care homes, or low-risk wards. It is also the level given to visitors, for example, after someone has given birth. It provides a “slight” barrier to small amounts of fluid penetration.

What's A Level 2 Isolation Gown?

A level 2 isolation gown is the next step up, and is considered “low risk”. This is the gown that needs to be used for working in the ICU or other more intensive care situations outside of the hospital. It’s also necessary when doing stitches and sutures, drawing blood, or working in laboratory settings with pathogens. Level 2 provides a barrier to “large” amounts of fluid, and even some soaking.

What's The Difference Between Level 1 And Level 2 Isolation Gowns?

As you can see, the difference is significant in the amount of protection they offer, and in which situations they are suitable for use. Level 1 is suitable for any low-risk or routine care situation where it is highly unlikely there will be blood or other bodily fluids. It is simply necessary to take precautions to protect the wearer and anyone in their care from the spread of microorganisms.

Level 2 is necessary when there’s a high likelihood that the wearer may come into contact with blood, bodily fluids or infectious microorganisms, such as when suturing, drawing blood, working in the ICU, or in pathology. Level 2 offers significantly more protection than Level 1.

There are two further levels, Level 3 and Level 4. These are for use in circumstances where you are likely to come into contact with bodily fluids, such as trauma cases, fluid-intense surgical procedures, and when non-airborne infectious diseases may be present, and so are reserved for moderate and high-risk situations.

Below is a table summarizing the ANSI/AAMI PB70 standard recognized by the FDA.

TYPE OF PPE	FEATURE TESTED	STANDARD DESIGNATION	SUB HEADINGS	DESCRIPTION	APPLICABILITY
Gowns	Liquid Barrier Performance	AAMI PB70:2012		Classifies a gown’s ability to act as a barrier to penetration by liquids or liquid-borne pathogens based on four levels. The critical protective zones for surgical and non-surgical gowns are defined differently by the standard. While the critical zones designate different protective areas for the different gowns, the levels of protection are the same for both surgical and non-surgical gowns	Liquid barrier performance is not related to the strength of the material.This standard references several other standards
			Level 1	Used for MINIMAL risk situations Provides a slight barrier to small amounts of fluid penetration Single test of water impacting the surface of the gown material is conducted to assess barrier protection performance.	basic care, standard hospital medical unit
			Level 2	Used in LOW risk situations Provides a barrier to larger amounts of fluid penetration through splatter and some fluid exposure through soaking Two tests are conducted to assess barrier protection performance: Water impacting the surface of the gown material Pressurizing the material	Blood draw from a vein, Suturing, Intensive care unit, Pathology lab
			Level 3	Used in MODERATE risk situations Provides a barrier to larger amounts of fluid penetration through splatter and more fluid exposure through soaking than Level 2 Two tests are conducted to test barrier protection performance: Water impacting the surface of the gown material Pressurizing the material	Arterial blood draw, Inserting an IV, Emergency Room, Trauma
			Level 4	Used in HIGH risk situations Prevents all fluid penetration for up to 1 hour May prevent VIRUS penetration for up to 1 hour In addition to the other tests conducted under levels 1-3, barrier level performance is tested with a simulated blood containing a virus. If no virus is found at the end of the test, the gown passes.	Pathogen resistance, Infectious diseases (non-airborne), Large amounts of fluid exposure over long periods